A Row house is (typically) a single-family home set at the same point on the property line as its neighboring units, sharing a common wall, roofline and, generally, a consistent exterior design.

Let us understand the difference between a Rowhouse and an Apartment. Rowhouse – The area offered in row houses is bigger than an apartment but smaller than the area of a bungalow. The price of rowhouses is usually more than apartments. It is because you have space and luxury all to yourself.

A farmhouse is typically a property in an agricultural setting amidst greenery and used for residential purposes. Farmhouses are usually nestled amid a farm or landscaped garden in rural provinces and are spread across a vast land area.

(A farmhouse means a residential area amid beautiful landscapes.) As per the literal farmhouse meaning, a farmhouse is a kind of residential residence located in an agricultural environment. Typically accompanied by a farm or a garden, these houses are also utilised as rural holiday homes.

The size of a villa can be anywhere between 2,000 sq ft and 4,000 sq ft. However, this can go higher as the case may be. Depending on the location, villas could easily cost upwards of Rs 1 crore. Property costs include the land and construction costs.

In India, the average cost of constructing a 1,000-square-foot house is Rs 12 lakh. This may differ depending on the city and other considerations such as labour availability, raw material supply, and the quality of the furnishings you use.

The pump forces water upwards to create a falling effect into a lower basin. The pump uses water pressure and tubes to force the water back into the reservoir to start the cycle over again. The number of reservoirs and pumps in a fountain can vary, with large outdoor fountains commonly having multiple basins.

A fountain, from the Latin "fons" (genitive "fontis"), meaning source or spring, is a decorative reservoir used for discharging water. It is also a structure that jets water into the air for a decorative or dramatic effect.

Interlocking Concrete Block Pavement (ICBP) has been extensively used in a number of countries for quite sometime as a specialized problem-solving technique for providing pavement in areas where conventional types of construction are less durable due to many operational and environmental constraints.

Interlocking is required to be perfect while laying as sand or other impurities might penetrate the gaps leaving the blocks isolated from the nearby blocks. This would result in breaking of the pattern and eventually the blocks would come out of the place.

Roller-compacted concrete (RCC) pavements are a type of concrete pavement that do not include embedded steel or load transfer devices and typically is not jointed due to its method of placement.

Reinforced Cement Concrete. RCC stands for Reinforced Cement Concrete. In RCC, the concrete which is made up of cement, coarse gravel and water is reinforced with the help of steel or iron bars.

The process of constructing a concrete road involves several steps, including preparing the subgrade, placing the forms, watering the prepared subgrade, batching the materials, transporting and laying the concrete mix, compaction, floating, belting, brooming, edging, joint filling, curing, and opening to traffic.

Warehouses are most commonly constructed of steel and metal materials. They tend to have fewer plumbing, HVAC, electrical, and other concerns as other types of buildings. However, the specific materials will also depend on the requirements of the building.

The main structure of a warehouse is typically made from steel. The steel is in the form of interlocking poles and pipes, which are then welded together to create a tall yet durable frame for the cladding and roof to be affixed to.

Structural steel fabrication is the process of constructing or reconstructing metal structures with steel. This fabrication process basically consists of cutting, bending, and assembling the fabricated steel.

Structural fabrication refers to the cutting, bending, and assembling of raw materials—generally steel—to create finished products, systems, and structures. It does not include any operations focused on strengthening or repairing the material.

For example, steel fabrication is the production of metal structures using a range of processes such as cutting, bending and assembling.